Leone Dental Products in Saudi Arabia

..

Low pull. Same as headgear both for use with safety modules and materials. Available in 2 colours to provide patient’s psycological compliance...

Circular scalpel to be attached to the handle of the screwdriver Leone Cat. 080-1000-01 for mini implants. With a diameter slightly larger than the head of the mini implants, the scalpel allows to prepare a suitable hole, without the need of any suture afterwards..

Developed with the assistance and clinical experience of Prof. Nicola Veltri, these screws are exclusively used to distalize the upper molars in a unilateral configuration only...

Preformed NITI Archwire Round round is made up of high-quality nickel titanium and so,we whiteroot prefer to get a perfect archwire round that hold your brackets in the right position. The archwire retains its shape memory by reducing the chair time and patient wire changes...

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

..

..

This new Leone anatomical expander is the ideal solution for patients who need an orthopaedic maxillary expansion, as it allows the fabrication of devices with limited dimensions, high stability, comfort, and safety. The small sizes of the body and the orthogonal position of the bending arms allow a..

For use with the suitable headgear or neck pads only. Safety clasps disengage the spring strap when a pressure pull of 2 Kg each side is exceeded. This system avoids dangerous slingshot rebound injuries of the facebow in case of disconnection from headgear tubes. Coil springs are incorporated into t..

Made entirely of biomedical stainless steel. The housing design is completely smooth, with no rough areas for a secure hygiene. The expander limit, a directional arrow and the lot number are laser engraved on the expander‘s body...

For correction of Class III malocclusions with prognathism of the mandible. Headgear and elastic tractions are fully adaptable; the chin cap in natural leather assures an ideal fit to any face...

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

This device is an evolution in the design of the previous spring-loaded expander, designed with technical and scientific collaboration of Dr. Claudio Lanteri and Mr. Filippo Francolini. This new expander features a small size body, and it is equipped with two Nickel Titanium MEMORIA® leaf springs al..

Preformed NITI Archwire Round round is made up of high-quality nickel titanium and so,we whiteroot prefer to get a perfect archwire round that hold your brackets in the right position. The archwire retains its shape memory by reducing the chair time and patient wire changes...

The screws are made of biomedical stainless steel of the highest quality and male screw threads with centesimal tolerances and total absence of surface roughness. The bodies and the guides are made with tolerances of +/-0.01 mm which ensure stability and precision. The wide range available allows th..

Made entirely of biomedical stainless steel wire, 1,80 mm in diameter, with single piece inner bow, 1,14 mm (.045”) in diameter. Breakage resistant laser welded bow and bite joints, 0,5 mm thick, with total absence of solder, to prevent from eventual allergic reactions due to the presence of two met..

..

High pull. Use with safety release spring modules only. It fits onto safety hooks of spring modules. Made of 100% cotton, hypoallergenic and washable with comfortable padding..

Designed for the insertion of orthodontic mini implants. Made of titanium surgical grade. It is used with low speed contraangle allowing the creation of a suitable hole in the attached mucosa. Diameter 2,2 mm..

Developed with the assistance and clinical experience of Prof. Nicola Veltri, these screws are exclusively used to distalize the upper molars in a unilateral configuration only...

..

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

The innovative telescopic guides assure a constant friction throughout the expansion movement, a perfect stability and small sizes. It self deactivates when maximum expansion capacity has been achieved preventing from overtreatment. The 7 mm expander is ideal to treat very narrow palates. The expand..