Leone Dental Products in Saudi Arabia

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

The special purpose expansion screws are made of biomedical stainless steel with a mechanical tolerance superior to 1/100 mm. The thread parts are absolutely smooth and they ensure great sturdiness, good friction and prevent from any unwanted turning back...

For use with the suitable headgear or neck pads only. Safety clasps disengage the spring strap when a pressure pull of 2 Kg each side is exceeded. This system avoids dangerous slingshot rebound injuries of the facebow in case of disconnection from headgear tubes. Coil springs are incorporated into t..

..

Made entirely of biomedical stainless steel. The housing design is completely smooth, with no rough areas for a secure hygiene. The expander limit, a directional arrow and the lot number are laser engraved on the expander‘s body...

Chromium stainless steel alloy. Diamond drawn to obtain highly resistant and stainless levelled surfaces. Suitable for all orthodontic applications..

..

..

This device is an evolution in the design of the previous spring-loaded expander, designed with technical and scientific collaboration of Dr. Claudio Lanteri and Mr. Filippo Francolini. This new expander features a small size body, and it is equipped with two Nickel Titanium MEMORIA® leaf springs al..

The package contains: 24 mini implants, 2 pieces each length and diameter available with low and high head, 4 drills, 1 screwdriver..

The screws are made of biomedical stainless steel of the highest quality and male screw threads with centesimal tolerances and total absence of surface roughness. The bodies and the guides are made with tolerances of +/-0.01 mm which ensure stability and precision. The wide range available allows th..

Made entirely of biomedical stainless steel wire, 1,80 mm in diameter, with single piece inner bow, 1,14 mm (.045”) in diameter. Breakage resistant laser welded bow and bite joints, 0,5 mm thick, with total absence of solder, to prevent from eventual allergic reactions due to the presence of two met..

Conceived with the cooperation of Dr. Eleonora Schellino and Prof. Remo Modica. Entirely made of biomedical stainless steel. The expanding arms are laser welded to the screw body. Laser engraved directional arrows on the MIM® body. It is a device for the rapid expansion of the palate that allows you..

Low pull. Same as headgear both for use with safety modules and materials. Available in 2 colours to provide patient’s psycological compliance...

Preformed NITI Archwire Round round is made up of high-quality nickel titanium and so,we whiteroot prefer to get a perfect archwire round that hold your brackets in the right position. The archwire retains its shape memory by reducing the chair time and patient wire changes...

..

Developed with the assistance and clinical experience of Prof. Nicola Veltri, these screws are exclusively used to distalize the upper molars in a unilateral configuration only...

Chromium stainless steel alloy. Diamond drawn to obtain highly resistant and stainless levelled surfaces. Suitable for all orthodontic applications..

..

..

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

..

For use with the suitable headgear or neck pads only. Safety clasps disengage the spring strap when a pressure pull of 2 Kg each side is exceeded. This system avoids dangerous slingshot rebound injuries of the facebow in case of disconnection from headgear tubes. Coil springs are incorporated into t..

..