resin-reinforced, glass ionomer luting cement designed for final cementation of metal, porcelain-fused-to-metal, metal-free crowns, bridges, inlays and onlays. It bonds chemically and mechanically to tooth structure and all types of core material. Its simple placement technique produces significantl..
resin-reinforced, glass ionomer luting cement designed for final cementation of metal, porcelain-fused-to-metal, metal-free crowns, bridges, inlays and onlays. It bonds chemically and mechanically to tooth structure and all types of core material. Its simple placement technique produces significantl..
AquaCem is a light-yellow, translucent glass-ionomer luting material consisting of a blend of alumino-silicate glass and polyacrylic acid.The powder is mixed with distilled water to produce a luting material which adheres to dentin and enamel producing tightly sealed cementations.1 x 30 g AquaCe..
INDICATIONS:
For the attachment of crowns, bridges, inlays, onlays, pins, posts and orthodontic bands
ADVANTAGES:
Adequate working time also for difficult attachments
No temperature rise during setting
Low acidity
Highly biocompatible
Excellent adhesion to dentine and enamel
High compressive stre..
High adhesion values compared with conventional glass ionomer luting cements
Precise marginal fit
Thixotropic: Very good wetting behaviour without unwanted run-off
Low film thickness
Moisture and acid resistant
Simple removal of excess material thanks to long elastic phase
Self-adhesive: secur..
Luting of:
metal-based crowns, bridges, inlays and onlays
high-strength all-ceramic crowns and bridges
metal-based and high-strength all-ceramic crowns and bridges on implant abutments
metal root posts or indirect metal post core build-ups
prefabricated steel crowns
orthodontic bands..
Self cure conventional glass ionomer cement for luting of crowns and bridges
Good adhesion to dentin and enamel
Fluoride release, biocompatible and radiopaque
Easy to mix and to use
Good marginal fit and seal..
Natural translucency and esthetics
Convenient to apply and easy to handle
Easy finishing
Low solubility
High fluride release and radiopaque
OptiCaps® mixing time: 10 sec
Working time: 1:30 min from the start of mixing at 23 °C (73 °F)..
Micron Luting is a convenient self curing, fine particle, fluoride releasing, glass ionomer luting cement for crowns, bridges, securing inlays, onlays, post and orthodontic brackets.
Indications:
Cementationofinlays, onlays and crowns
Cementation of posts and screws
Attachment of metal orthodontic b..
Natural translucency and esthetics
Convenient to apply and easy to handle
Easy finishing
Low solubility
High fluride release and radiopaque
OptiCaps® mixing time: 10 sec
Working time: 1:30 min from the start of mixing at 23 °C (73 °F)..
Deciduous teeth: final restoration for Class I, II and V
Long term restoration in non-load bearing areas of Class I, II
Restoration of Class V
Intermediate restorative
Sandwich material for heavy stress bearing Class I and II cavities
Properties
Aesthetic glass-ionomer filling material, self-c..
Light and self cure resin-reinforced glass ionomer cement for fillingsEasy to mix and to use
Good and non-sticky consistency
Light and self cure
Low shrinkage
Radiopaque15 g powder in the shade A3 / 8 ml liquid, dosage spoon, mixing pad..
Esthetic light and self cure resin-reinforced glass ionomer cement for fillingsFine fillers
Good polishability, almost like composites
No mandatory of additional bonding and surface sealing
High mechanical properties, virtually no shrinkage
Practically insoluble
Fluoride release and radiopaque
Opt..
Packing:Automix Syringe 6g + Primer + 2x Monobond N + Accessories
Curing:Dual-Cure
Shade:Transparent
Type:Glass Ionomer Luting
The universal luting composite system Multilink N is suitable for the adhesive cementation of metal, metall-ceramic, all-ceramic and composite resing restorations.The luting composite and self-etch adhesive (Multilink N Primer) of the Multilink N-System are specially co-ordinated. The self-etch ad..