BEGO Dental Products in Saudi Arabia

Compatible with BEGO Rapid wax system For all BEGO crown and bridge investment materials Compatible with Rapid Wax System Minimal wear, thus lower costs than with comparable systems Universally applicable for many casting systems, easy separation of mould and mould ring Time savings in relation to m..

Alpha corundum with high hardness It remains sharp-edged until completely worn When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface conditioning of non-precious alloys prior to ceramic firing The high..

For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min Content/amount 100 pieces Product description Ø 15.5 mm, colour: green..

Fornax Ceramic Crucibles PK/6..

Hard and medium-hard wax compositions in blue, dark blue, grey and dentine ensure optimum waxing of all types of crowns Colour preferences and facilitate customised contouring can be easily provided by three shades The balanced shrinkage of BEGO crown and bridge waxes is reduced to a minimum by the ..

Tried and tested wax for modelling the bases of upper partial dentures Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the su..

BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..

for maxillary partial denture. Permit the simple and effective shaping of retentions to total or partial dentures They guarantee a high level of security in the connection between the resin and the partial denture plate The large grid retentions facilitate very economical use of material..

Setting time (vicat-time) 6 min Product description Universal investment material Compressive strength 11 MPa Linear thermal expansion 0,8 % Flowability 140 mm Content/amount 18 kg (45 x 400 g bag) Processing time at 22°C ca. 3:30 min..

BEGO milling waxes in green and grey are specially formulated to meet the particular challenges of machine processing The ideal hardness of the wax prevents shavings from adhering to the wax-up and clogging up the milling tool, so the view of the milled surface is unobstructed at all timesAlso ide..

Metal Mould Ring Size 6, 360g..

Preheat temp. to 800 °C Casting temperature 1350,00 °C Liquidustemp. 1280 °C Solidustemp 1210 °C Composition Ni 64,6 · Cr 22,0 · Mo 10,0 · Si 2,1 · B · Mn · Nb Density g/cm³ 8,2 g/cm³ Tensile strength 860 MPa Color code 8 Content/amount 1 kg pack Base metall Nickel Elongation at break 9 % Iso type I..

For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min Content/amount 100 pieces Product description Ø 22 x 3.5 mm, colour: green..

The preparation wax is exceptionally malleable, allowing it to be adapted to the master model perfectly and with firm adhesion, which saves having to use an additional wax adhesive The exemplary shape retention and edge strength of the preparation wax, with a high solidification point of approx. 70 ..

Simple, crease-free adaptation Adheres firmly to the investment model and burns out leaving no residue The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up Sheet size 15 x 7.5 cm..

BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..

These preshaped clasp profiles simplify modelling and save time The shape of the profiles enables a large number of variations by shortening the wax form..

Type 4 high-quality, super-hard plaster which has been tried and tested over many years for building up models for the crown and bridge, inlay, partial denture and CAD/CAM techniques • Optimal accuracy of detail with all standard impression materials demonstrates the extraordinary versatility of the..

Alpha corundum with high hardness It remains sharp-edged until completely worn When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface conditioning of non-precious alloys prior to ceramic firing The high..

For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min Content/amount 100 pieces Product description Ø 15.5 mm, colour: black..

Nautilus Ceramic Crucibles PK/4..

Ideal for efficient and aesthetic modelling of occlusal surfaces. BEGO occlusal wax is available in two pastel shades to facilitate the shaping of occlusal surfaces. The choice of shades is a matter of personal preference. The advantage of light pastel shades, as with all BEGO occlusal waxes, is tha..

Tried and tested wax for modelling the bases of upper partial dentures Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the su..

Springy steel designed for acrylic work and regulations..