Top Quality
Share
NLZ Electric Motor with Endodontic Function + Contra Angle Handpiece + Endo Hanpiece
11,128.00 SR
Ex Tax: 11,128.00 SR
- Category: Electric Motors
- Brand: NSK
- Model: Y1004004 + C1023 + C1130
- Stock: In Stock
- Type: Complete Unit
Delivery Before 11/05/2024 Sat
Less Heat
NLZ employs a simple non-layered coil instead of a standard layered coil. The coils are as compact as possible, shortening the pathway for heat generating current. As a result it generates less heat without reducing the output power.
Simplified Pipe Configuration
Conventional products include several pipes, which crank the water flow supplied from the rear of the motor. The NLZ uses a simple straight pipe design instead of a crank, reducing the risk of water clogging in the rear section of the motor.
Contaminants Are Stopped by a Microfilter
There is a water filter with 0.3 mm diameter mesh fitted within the tubing connector at the back of the main unit to catch debris and foreign particles in the water and prevent clogging.
Endo Torque Calibration Function
Performing the “Contra-Check Function” also enables torque calibration. This function measures the no-load current values and corrects the torque accordingly, resulting in greatly enhanced safety in endodontic treatment.
*This function cannot completely absorb the individual difference of the actual motor and contra-angles.
Motor Type Brushless Micromotor Max Torque 4.2 Ncm Endodontics Torque 0.3-6.0 Ncm (Depending on Gear Ratio) Motor Speed 100-40,000 min-1 Dimension Ø22 x H 68.8 mm Weight 59 g (Motor Only) Light White LED
NLZ employs a simple non-layered coil instead of a standard layered coil. The coils are as compact as possible, shortening the pathway for heat generating current. As a result it generates less heat without reducing the output power.
Simplified Pipe Configuration
Conventional products include several pipes, which crank the water flow supplied from the rear of the motor. The NLZ uses a simple straight pipe design instead of a crank, reducing the risk of water clogging in the rear section of the motor.
Contaminants Are Stopped by a Microfilter
There is a water filter with 0.3 mm diameter mesh fitted within the tubing connector at the back of the main unit to catch debris and foreign particles in the water and prevent clogging.
Endo Torque Calibration Function
Performing the “Contra-Check Function” also enables torque calibration. This function measures the no-load current values and corrects the torque accordingly, resulting in greatly enhanced safety in endodontic treatment.
*This function cannot completely absorb the individual difference of the actual motor and contra-angles.
Motor Type Brushless Micromotor Max Torque 4.2 Ncm Endodontics Torque 0.3-6.0 Ncm (Depending on Gear Ratio) Motor Speed 100-40,000 min-1 Dimension Ø22 x H 68.8 mm Weight 59 g (Motor Only) Light White LED
