Hard and medium-hard wax compositions in blue, dark blue, grey and dentine ensure optimum waxing of all types of crowns
Colour preferences and facilitate customised contouring can be easily provided by three shades
The balanced shrinkage of BEGO crown and bridge waxes is reduced to a minimum by the ..
Fornax T has a very powerful induction heating of 3,600 VA.The advantages for you:
Rapid heating and melting of all commercially available precious and non-precious alloys (except titanium)
Sufficient power reserves even with critical alloys
Oxidation is minimised to the absolute necessary due to ..
The rounded upper edge and concave shape facing the tongue plus the anatomical lower-jaw profile make for good patient acceptance
Tip: For periodontal prophylaxis, a distance of 4 mm should be maintained between the gingival margin and the upper edge of
the bar in the case of lower-jaw partial dentu..
• Special duplicating hydrocolloid for sophisticated partial dentures, combination work and the acrylic casting technique
• User-friendly thanks to its high level of impression-taking accuracy, even with the finest of details, and tear-resistant due to its outstanding elasticity. This offers you the..
These preshaped clasp profiles simplify modelling and save time
The shape of the profiles enables a large number of variations by shortening the wax form..
Special corundum blasting material made from 99.6 % aluminium oxideAlpha corundum with high hardness
It remains sharp-edged until completely worn
When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface..
Very thin and extremely flexible, they can be used for all dental alloys
Especially well-suited for the partial denture technique, for finishing areas that are difficult to access as well as for crown and bridge work – for example, for interdental work because they conform very closely to the shape ..
The preparation wax is exceptionally malleable, allowing it to be adapted to the master model perfectly and with firm adhesion, which saves having to use an additional wax adhesive
The exemplary shape retention and edge strength of the preparation wax, with a high solidification point of approx. 70 ..
Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
Depending on the alloy and the field of application, the required mixing ratio can be created for these liquids using distilled or demineralised water
The higher the concentration of the mixing liquid, the greater the expansion of the investment material..
Composition: Co 63.0, Cr 30.0, Mo 5.0, Si 1.0, Mn 1.0, C
Base Metal: Cobalt
Color Code: 8
Preheat Temperature:
From: 950 °C
To: 1050 °C
Casting Temperature: 1420 °C
Solidus Temperature: 1270 °C
Liquidus Temperature: 1400 °C
Vickers Hardness: 385 HV10
..
An increasing number of waxed-up restorations are being scanned using the CAD/CAM technique
The use of highly opaque wax is the most effective way of preventing translucent effects and ensuring optimal data generation
Precision dental restorations using the CAD/CAM technique can only be fabricated i..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
Precise reproduction, saving of material, dimensional stability and easy handling characterise the Wirosil® duplicating flask system.It consists of:
the base that holds the model
the sleeve with the optimal shape for upper and lower jaw models
the stabilisation insert of crucial importance for pre..
These preshaped clasp profiles simplify modelling and save time
The shape of the profiles enables a large number of variations by shortening the wax form..