Preheat temp. to 800 °C
Casting temperature 1350,00 °C
Liquidustemp. 1280 °C
Solidustemp 1210 °C
Composition Ni 64,6 · Cr 22,0 · Mo 10,0 · Si 2,1 · B · Mn · Nb
Density g/cm³ 8,2 g/cm³
Tensile strength 860 MPa
Color code 8
Content/amount 1 kg pack
Base metall Nickel
Elongation at break 9 %
Iso type I..
The preparation wax is exceptionally malleable, allowing it to be adapted to the master model perfectly and with firm adhesion, which saves having to use an additional wax adhesive
The exemplary shape retention and edge strength of the preparation wax, with a high solidification point of approx. 70 ..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
Formaldehyde-free, biodegradable, toxicologically safe
Kind to the skin
No unpleasant odour
Quartz-free – no danger of silicosis
Excellent polishing performance down to the last gram – low residual roughness
Smooth consistency..
These preshaped clasp profiles simplify modelling and save time
The shape of the profiles enables a large number of variations by shortening the wax form..
Compatible with BEGO Rapid wax system
For all BEGO crown and bridge investment materials
Compatible with Rapid Wax System Minimal wear, thus lower costs than with comparable systems
Universally applicable for many casting systems, easy separation of mould and mould ring
Time savings in relation to m..
Alpha corundum with high hardness
It remains sharp-edged until completely worn
When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface conditioning of non-precious alloys prior to ceramic firing
The high..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 15.5 mm, colour: green..
Ideal for efficient and aesthetic modelling of occlusal surfaces. BEGO occlusal wax is available in two pastel shades to facilitate the shaping of occlusal surfaces. The choice of shades is a matter of personal preference. The advantage of light pastel shades, as with all BEGO occlusal waxes, is tha..
Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
for partial upper-jaw denture
Can be used as retentions for partial maxillary dentures and as a reinforcement for acrylic full maxillary acrylic dentures..
Setting time (vicat-time) 6 min
Product description Universal investment material
Compressive strength 11 MPa
Linear thermal expansion 0,8 %
Flowability 140 mm
Content/amount 18 kg (45 x 400 g bag)
Processing time at 22°C ca. 3:30 min..
The half tear-drop shaped cross section prevents food residues from getting stuck on molars and premolars and increases the stability over the entire clasp length
All in all a very slender clasp profile with very good acceptance among patients
BEGO wax clasp profiles are very easy to mould, do not b..
This wax was developed for blocking out undercuts, creating clasp steps and relieving critical areas of the model
This blocking-out wax can be easily scraped and cut, is hard and thus ensures the dimensionally-stable, well-defined reproduction of clasp steps on the investment model
The boiling-out t..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 22 x 3.5 mm, colour: green..
The preparation wax is exceptionally malleable, allowing it to be adapted to the master model perfectly and with firm adhesion, which saves having to use an additional wax adhesive
The exemplary shape retention and edge strength of the preparation wax, with a high solidification point of approx. 70 ..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
Time savings when modelling upper-jaw frames with large saddles
A great advantage is that the border strip can easily be shaped as desired since the size can be varied by trimming the tips of the retentions
The wax is so supple that it can be shaped easily and reliably as required onto the duplicate..
Compatible with BEGO Rapid wax system
For all BEGO crown and bridge investment materials
Compatible with Rapid Wax System Minimal wear, thus lower costs than with comparable systems
Universally applicable for many casting systems, easy separation of mould and mould ring
Time savings in relation to m..