Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
for maxillary partial denture.
Permit the simple and effective shaping of retentions to total or partial dentures
They guarantee a high level of security in the connection between the resin and the partial denture plate
The large grid retentions facilitate very economical use of material..
Depending on the alloy and the field of application, the required mixing ratio can be created for these liquids using distilled or demineralised water
The higher the concentration of the mixing liquid, the greater the expansion of the investment material..
BEGO cervical wax for cervical edges in eggplant (aubergine) is a tension-free wax on which extremely high demands are placed during modelling
BEGO cervical wax is completely tension-free after modelling and is therefore highly recommended for details on cervical edges of crowns, precision parts and..
Preheat temp. from 900 °C
Preheat temp. to 1000 °C
Density g/cm³ 8,3 g/cm³
Iso type ISO22674 3
Base metall Nickel
Elastic modul 170
Yield strength 335 MPa
Tensile strength 655 MPa
Elongation at break 43 %
Content/amount 1 kg pack
Vickershardness 195 HV10
Liquidustemp. 1360 °C
Casting temperature 145..
An increasing number of waxed-up restorations are being scanned using the CAD/CAM technique
The use of highly opaque wax is the most effective way of preventing translucent effects and ensuring optimal data generation
Precision dental restorations using the CAD/CAM technique can only be fabricated i..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
The low thermal conductivity of the plastic guarantees stressfree cooling of the duplicating material
Two wedges integrated in the flask cover prevent rotation and ensure proper placement of the form back in the flask
The Combi duplicating flasks are designed for use with our mould rings..
Slender standard clasp profiles for molars
BEGO wax clasp profiles help saving time during modelling. The wax shapes can be customised by shortening or lengthening..
Compatible with BEGO Rapid wax system
For all BEGO crown and bridge investment materials
Compatible with Rapid Wax System Minimal wear, thus lower costs than with comparable systems
Universally applicable for many casting systems, easy separation of mould and mould ring
Time savings in relation to m..
Alpha corundum with high hardness
It remains sharp-edged until completely worn
When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface conditioning of non-precious alloys prior to ceramic firing
The high..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 6.5 x 24 mm, colour: black..
The red BEGO hard-elastic dipping wax ensures a distinct, reproducible quality of coping. The viscosity remains constant even if the wax is kept at stand-by temperature for a long time, and thus enables targeted control of the coping thickness. Only contains organic components
Processing temperature..
Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
for maxillary partial denture.
Permit the simple and effective shaping of retentions to total or partial dentures
They guarantee a high level of security in the connection between the resin and the partial denture plate
The large grid retentions facilitate very economical use of material..
Setting time (vicat-time) ca. 10 min
Product description Precision casting investment material for crown & bridge techniques
Linear thermal expansion 0,8 %
Flowability 140 mm
Compressive strength 4,2 - 5,1 MPa
Content/amount 12.8 kg (80 x 160 g bag)
Shelf life 24 Monat[e]
Processing time at 22°C ca...
BEGO milling waxes in green and grey are specially formulated to meet the particular challenges of machine processing
The ideal hardness of the wax prevents shavings from adhering to the wax-up and clogging up the milling tool, so the view of the
milled surface is unobstructed at all timesAlso ide..
Preheat temp. to 800 °C
Casting temperature 1350,00 °C
Liquidustemp. 1280 °C
Solidustemp 1210 °C
Composition Ni 64,6 · Cr 22,0 · Mo 10,0 · Si 2,1 · B · Mn · Nb
Density g/cm³ 8,2 g/cm³
Tensile strength 860 MPa
Color code 8
Content/amount 1 kg pack
Base metall Nickel
Elongation at break 9 %
Iso type I..