PlastVac P7-Plus 220V

Clinical Overview

The PlastVac P7‑Plus is a compact, digital vacuum-forming device featuring dual-sided heating and programmable timing. Powered by a 1400 W motor and carbon-fiber heating element, it enables consistent production of thermoplastic appliances—such as mouthguards, bleaching trays, surgical guides, and orthodontic retainers—in a single clinical session with minimal setup.

Key Benefits

• Rotating dual-heating frame: uniformly heats both sides of the sheet for even forming, especially with up to 6 mm thick materials.
• Digital timer with audible alert: ensures precise and repeatable heating based on sheet type and thickness.
• Powerful vacuum motor: 1400 W vacuum engages automatically at the optimal moment for effective adaptation.
• Universal tray support: accommodates both round (Ø120–134 mm) and square (120–130 mm) sheets.
• No special installation needed: plug-and-play setup compatible with standard lab/clinic power lines.
• Fast ROI: typical cost recovery after forming ~30 appliances.

Kit Contents

• 1 × PlastVac P7‑Plus vacuum former unit (220 V)
• 1 × Heating frame and rotating base handle
• 1 × Power cable
• Accessories: glass beads (250 g), hex wrench, double‑sided tray support, user manual

Technical Specifications

• Voltage: 220 V (also available in 110 V version, not bivolt)
• Motor power: 1400 W vacuum + 450 W heating element
• Maximum sheet thickness: up to 6 mm
• Sheet size: round Ø120–134 mm; square 120×120 to 130×130 mm
• Weight & dimensions: approx. 5.4 kg; 24×27×19 cm footprint
• Construction: aluminum chassis, carbon-fiber heater, automatic vacuum activation

Indications

• Mouthguards, bruxism splints, bleaching trays
• Surgical guide and provisional guard fabrication
• Composite resin matrices, bracket positioning trays
• Study model packaging and orthodontic appliance trays

Instructions for Use

1. Place sheet in frame; adjust clamp and lift heating unit.
2. Set heating time on timer based on material; press start.
3. Once heated, rotate frame under vacuum motor—automatic vacuum engages.
4. Allow material to cool, then release and remove formed appliance.
5. Clean tray support and flush vacuum pathways between sessions.

Summary

The PlastVac P7‑Plus combines efficient, uniform heating with digital control and powerful vacuum performance in a streamlined package. It enables reliable, same-session production of dental appliances with minimal setup—ideal for clinics and labs seeking consistent, chairside thermoforming capability.