مستلزمات طب الاسنان من شركة Leone في السعودية

For use with the suitable headgear or neck pads only. Safety clasps disengage the spring strap when a pressure pull of 2 Kg each side is exceeded. This system avoids dangerous slingshot rebound injuries of the facebow in case of disconnection from headgear tubes. Coil springs are incorporated into t..

..

Made of stainless steel and biomedical techno polymer. • The male screw is not in contact with the orthodontic acrylic resin: the function of the screw will not be influenced by the quality of the technical procedure and a non-compliant curing time. • Continuous expansion movement: the high pressure..

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

The innovative telescopic guides assure a constant friction throughout the expansion movement, a perfect stability and small sizes. It self deactivates when maximum expansion capacity has been achieved preventing from overtreatment. The 7 mm expander is ideal to treat very narrow palates. The expand..

..

..

Made entirely of biomedical stainless steel wire, 1,80 mm in diameter, with single piece inner bow, 1,14 mm (.045”) in diameter. Breakage resistant laser welded bow and bite joints, 0,5 mm thick, with total absence of solder, to prevent from eventual allergic reactions due to the presence of two met..

Made entirely of biomedical stainless steel. The housing design is completely smooth, with no rough areas for a secure hygiene. The expander limit, a directional arrow and the lot number are laser engraved on the expander‘s body...

Low pull. Same as headgear both for use with safety modules and materials. Available in 2 colours to provide patient’s psycological compliance...

The special design of mini implants makes the insertion easy without the use of any pre-drilling hole. The endosseous portion of the self drilling mini implant features one apical portion (2 mm length) drill shaped to punch the bone and one threaded portion (1,75 mm in diameter and 6 mm length) with..

Developed with the assistance and clinical experience of Prof. Nicola Veltri, these screws are exclusively used to distalize the upper molars in a unilateral configuration only...

Preformed NITI Archwire Round round is made up of high-quality nickel titanium and so,we whiteroot prefer to get a perfect archwire round that hold your brackets in the right position. The archwire retains its shape memory by reducing the chair time and patient wire changes...

..

It is initially the softest of the two tempers. It is intended for construction of archwires which require considerable bending. After heat-treating (480° C), it will become so hard as stainless steel wires. Recommended for Ricketts technique...

This new Leone anatomical expander is the ideal solution for patients who need an orthopaedic maxillary expansion, as it allows the fabrication of devices with limited dimensions, high stability, comfort, and safety. The small sizes of the body and the orthogonal position of the bending arms allow a..

For use with the suitable headgear or neck pads only. Safety clasps disengage the spring strap when a pressure pull of 2 Kg each side is exceeded. This system avoids dangerous slingshot rebound injuries of the facebow in case of disconnection from headgear tubes. Coil springs are incorporated into t..

..

Chromium stainless steel alloy. Diamond drawn to obtain highly resistant and stainless levelled surfaces. Suitable for all orthodontic applications..

Made of stainless steel for surgical use and easily removable once the orthodontic movement has been achieved. They are available either with low or high head, in two types: one with a passing hole on the head and another with a groove and the protruding portion like an orthodontic button to facilit..

This device is an evolution in the design of the previous spring-loaded expander, designed with technical and scientific collaboration of Dr. Claudio Lanteri and Mr. Filippo Francolini. This new expander features a small size body, and it is equipped with two Nickel Titanium MEMORIA® leaf springs al..

Preformed NITI Archwire Round round is made up of high-quality nickel titanium and so,we whiteroot prefer to get a perfect archwire round that hold your brackets in the right position. The archwire retains its shape memory by reducing the chair time and patient wire changes...

..

Made entirely of biomedical stainless steel wire, 1,80 mm in diameter, with single piece inner bow, 1,14 mm (.045”) in diameter. Breakage resistant laser welded bow and bite joints, 0,5 mm thick, with total absence of solder, to prevent from eventual allergic reactions due to the presence of two met..