شركة عبد الرحمن القصيبي

Highly hydrophilic addition-curing silicone for maximum precisionLong working time combined with a short intraoral setting timeExceptional toughness and recovery after deformation ensure safety during and after removalGood hydrophilicity, even after setting, renders pouring and thus t..

Fast setting temporary bis-acrylic crown and bridge material in 1:1 cartridge. All purpose, economical self-curing material for fabrication of temporary crowns, bridges, inlays and onlays. Simple and fast working Less than 1 minute set time in mouth Easy to shape and polish Available in 8 shades for..

INDICATIONS: Fillings of class I to V Reconstruction of traumatically affected anteriors Colour and shape corrections for better aesthetic appearance Locking, splinting of loose anteriors Extended fissure sealing for molars and premolars Repair of veneers Core build-up under crowns Especially suitab..

Grandio is a state-of-the-art, light-curing nano-hybrid composite designed for versatile dental restorative procedures. Developed using advanced nano-technology, it offers a balance of high physical strength and easy handling, ensuring long-lasting restorations with excellent aesthetics.Nano-Technol..

This medium-retention, non-eugenol temporary cement is enhanced with calcium hydroxide, ideal for use with temporary crowns and bridges. Its formula is designed to minimize postoperative sensitivities while providing an antimicrobial effect. The absence of eugenol eliminates the risk of allergies an..

INDICATIONS: For indirect pulp capping For linings under all filling materials ADVANTAGES: Ready to use - no mixing, no bubbles Higher compressive strength than a conventional calcium hydroxide Excellent adhesion, especially to composites Effective protection of the pulp Acid resistant Radiopaque..

INDICATIONS: Filling of small cavities Extended fissure sealing Blocking-out of undercuts Lining, coating of cavity walls Filling of cavity classes III to V incl. V-shaped defects and cervical caries Repair of composite fillings and veneers Luting of translucent prosthetic pieces (full ceramic crown..

Flowable universal nano-hybrid restorative materialIndications: Filling minimally invasive cavities of all classes Filling small class I cavities and extended fissure sealing Filling class II - V cavieties including V-shaped defects and cervical caries Blocking out of undercuts Lining or coating c..

4 mm restoration base in one simple step Cures reliably in only 10 seconds (shade universal) Perfect surface affinity for outstanding adaption Low shrinkage stress High level of radiopacity (350 %Al) Self-levelling Can be combined with any methacrylate-based bonding or composite The non-dripp..

Direct and indirect restorations using any light-curing methacrylate-based restorative, core build-up or cementing composite Intraoral repair of fillings, ceramic veneers and all-ceramic restorations without additional primer Treatment of hypersensitive tooth necks Protective varnish for glass..

INDICATIONS: Cica is intended to etch only that part of the enamel and of the dentine (in total-etch-technique), which will be covered by a composite material: in case of composite fillings in case of adhesive fixing of Maryland bridges, inlays, brackets and temporary splinting in case of sealing f..

High adhesion values compared with conventional glass ionomer luting cements Precise marginal fit Thixotropic: Very good wetting behaviour without unwanted run-off Low film thickness Moisture and acid resistant Simple removal of excess material thanks to long elastic phase Self-adhesive: secur..

INDICATIONS: For fillings with minimally invasive preparation technique For fillings of small cavities and extended fissure sealing For fillings of class III to V including V-shaped defects and cervical caries Repair of fillings and veneers Luting of translucent prosthetic pieces Substitute fillings..

Class I to V fillings Reconstruction of traumatically affected anteriors Facetting of discoloured anteriors Correction of shape and shade for better aesthetic appearance Locking, splinting of loose teeth Repairing veneers Filling deciduous teeth Core-build-up under crowns Composite i..

INDICATIONS: For cavity linings For core build-ups ADVANTAGES: No phosphoric acid or monomers Self-adhesion to dentine and enamel Dentine shaded Etchable High compressive strength High fluoride release: prevention against secondary caries Tooth-like thermal expansion Radiopaque Good biocompatibili..

INDICATIONS: For the production of temporary crowns, bridges, inlays and onlays ADVANTAGES: Direct and fast application: complete temporary crowns and bridges within less than 5 minutes! Auto-mixing, homogenous and bubble-free consistency Extra short mixing tips for an economic and precise applica..

INDICATIONS: Fillings of class I to V Reconstruction of traumatically affected anteriors Colour and shape corrections for better aesthetic appearance Locking, splinting of loose anteriors Extended fissure sealing for molars and premolars Repair of veneers Core build-up under crowns Especially suitab..

Universal nano-hybrid restorative materialIndications: Class I to V fillings Reconstruction of traumatically affected anteriors Facetting of discoloured anteriors Corrections of shape and shade for better aesthetic appearance Locking, splinting of loose anteriors Repairing veneers Filling deciduou..

Ufi Gel hard is the polymethacrylate-based, hardening, coldpolymerising, permanent denture material. Ufi Gel hard is also available in both cartridges and the hand-mix version. The Ufi Gel system offers the specific relining solution for every situation. Ufi Gel hard/C and Ufi Gel SC/P form an ideal..

Self-curing composite material for the fabrication of provisional crowns and bridgesIndications: Fabrication of aesthetic temporary crowns, bridges, inlays and onlaysAdvantages: Simple and fast working steps Less than 1 minute setting time in the mouth Easy to shape and polish Available in 8 sha..

INDICATIONS: Fillings of class I to V Reconstruction of traumatically affected anteriors Colour and shape corrections for better aesthetic appearance Locking, splinting of loose anteriors Extended fissure sealing for molars and premolars Repair of veneers Core build-up under crowns Especially suitab..

Filling minimally invasive cavities of all classes Filling small class I cavities and extended fissure sealing Filling class II - V cavities including V-shaped defects and cervical caries Blocking out undercuts Lining or coating cavities Repairing fillings and veneers Luting translucent ..

Light-curing glass ionomer composite linerIndications: Lining under all types of filling material Extended fissure sealing Restoration of smaller lesionsAdvantages: Ready-to-use one-component material Time-saving: light-curing in seconds Quick and hygienic application High compressive..

Excellent working time – setting time individually adjustable by light-curing. No need for conditioning of dental hard tissue. Immediately packable after placement in the cavity. Does not stick to the instrument, easy to model. Fill, polymerise and finish – no varnish required. Fluoride release..