ViscoStat Clear, 25% Aluminum Chloride, 30ml Indispense Refill

Clinical Overview

ViscoStat™ Clear is a transparent, viscous hemostatic gel containing 25 % aluminum chloride in a patented tissue‑kind silica vehicle. Designed especially for the esthetic zone, it rapidly controls minor bleeding and sulcular fluid without coagulum or residue, preserving enamel and soft-tissue aesthetics. Unlike ferric sulfate solutions, it does not interfere with bonding or impression materials.

Key Benefits

• Transparent, non-staining gel: Leaves no residue and rinses off easily to preserve tooth and soft-tissue appearance.
• Effective minor bleeding control: Stops capillary and sulcular oozing in seconds when scrubbed in.
• Bonding-compatible: Does not impair resin adhesion or impression accuracy.
• Non‑drip viscosity: Gel stays in place for precise application even on vertical surfaces.
• Waste‑free delivery: IndiSpense® syringe allows controlled application with minimal product loss.

Kit Contents

• 1 × 30 mL IndiSpense® syringe of ViscoStat™ Clear gel (25 % aluminum chloride)
• (Delivery tips for scrub‑in application sold separately—Metal or Blue Mini™ Dento‑Infusor™ recommended)

Application Protocol & Timing

1. Attach a Metal or Blue Mini™ Dento‑Infusor™ tip to the syringe.
2. Rub gel firmly into the bleeding tissue or sulcus. Dwell time: 1–3 minutes based on severity.
3. Rinse with firm air/water spray to remove gel and any coagulum. Re-evaluate and repeat if needed.
4. For impression protocols, soak retraction cord in the gel, insert for ~4–5 min, rinse again, dry field, then proceed.

Indications

• Sulcus retraction prior to impression-taking, especially in the esthetic zone
• Control of minor bleeding and gingival oozing during restorative and operative procedures
• Soft-tissue management without staining or residue prior to bonding or composite placement

Instructions for Use

1. Ensure field is isolated and sufficiently dry.
2. Attach Dento‑Infusor™ scrub tip to syringe.
3. Rub gel into bleeding site or sulcus until hemostasis is achieved (usually seconds to minutes).
4. Rinse thoroughly; confirm absence of gel residue or bleeding.
5. If using retraction cord: soak cord in gel, place for ~4–5 minutes, rinse, dry, then proceed with impression or bonding workflow.
6. Repeat application if bleeding reoccurs before completing procedure.
7. Dispose of scrub tip after use per infection-control protocols.

Summary

Ultradent ViscoStat™ Clear Indispense Refill (Ref. 6408) offers precise, residue-free bleeding control ideal for anterior and esthetic dental procedures. Its 25 % aluminum chloride gel provides effective hemostasis without staining or bonding interference. Delivered in a 30 mL syringe for efficient, waste-minimized use, it supports clean, predictable workflows around sulcus management and soft-tissue handling.