Opalescence Boost PF 40% In-Office Power Whitener, Patient Kit

Clinical Overview

Opalescence™ Boost™ PF 40% is a chemically activated, in‑office whitening gel with 40 % hydrogen peroxide, enhanced with potassium nitrate and fluoride (PF formula) to minimize sensitivity and support enamel integrity. Delivered via a double‑syringe system, the gel is activated chairside immediately before application, eliminating the need for heat or light activation. Ideal for powerful single-session whitening in approximately one hour.

Key Benefits

• High‑strength 40 % peroxide: Provides dramatic whitening in as little as two 20‑minute applications (~40 min).
• Chemical activation: No light source required—ensures consistent potency and patient comfort.
• PF formulation: Potassium nitrate and fluoride help reduce sensitivity and strengthen enamel.
• Viscous, red gel: Highly visible and non-runny for precise placement and full removal.
• No refrigeration before mixing: Ready-to-use at room temperature for streamlined workflow.
• Vegan & gluten‑free certified: Accommodates a broad patient base.

Kit Contents

• 2 × 1.2 mL Opalescence Boost/Activator syringes
• 1 × 1.2 mL OpalDam Green resin barrier syringe
• 1 × IsoBlock bite block
• 1 × Shade guide card
• 10 × Black Mini™ applicator tips
• 5 × Micro 20 ga tips and 5 × Micro 20 ga FX tips for detailed application

Contents support treatment for one patient per session.

Working Protocol & Application Timing

• Mixing: Activate gel by engaging double syringe and mixing vigorously (~50 strokes) until uniform; transfer compound into red syringe for use.
• Procedure: Perform two to three 20‑minute applications per session (40–60 min total). Remove gel between applications but rinse only after final application.

Indications

• Chairside in-office whitening for single arch or full‑mouth cases
• Effective for intrinsic staining (e.g. from tetracycline, trauma, fluorosis) or intensive extrinsic discoloration
• Emergency esthetic enhancement before events or procedures

Instructions for Use

1. Isolate soft tissues with OpalDam Green; light‑cure as per barrier instructions.
2. Activate gel via syringe mixing; verify flow through applicator tip before intraoral use.
3. Apply ~0.5–1 mm layer to target tooth surfaces using Black Mini™ tip; avoid gingival contact.
4. Maintain contact for 20 min; suction gel between each application. Repeat up to three times per session.
5. After final application, rinse thoroughly and remove OpalDam barrier. Inspect surfaces for any residual gel between teeth.
6. Evaluate shade change; recommend follow‑up session in 3–5 days if desired. Introduce desensitizing gel (e.g. UltraEZ™) post‑treatment if needed.

Summary

Opalescence™ Boost™ PF 40% Patient Kit (Ref. 4751U) is a high‑efficacy, single‑visit in‑office whitening solution leveraging chemically activated peroxide and PF formulation for rapid, comfortable, and precise results. Its red, viscous gel ensures controlled application and cleanup, while the included accessories support professional workflow and patient safety.