Fornax T has a very powerful induction heating of 3,600 VA.The advantages for you:
Rapid heating and melting of all commercially available precious and non-precious alloys (except titanium)
Sufficient power reserves even with critical alloys
Oxidation is minimised to the absolute necessary due to ..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 15.5 mm, colour: black..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 15.5 mm, colour: green..
Preheat temp. from 900 °C
Preheat temp. to 1000 °C
Density g/cm³ 8,3 g/cm³
Iso type ISO22674 3
Base metall Nickel
Elastic modul 170
Yield strength 335 MPa
Tensile strength 655 MPa
Elongation at break 43 %
Content/amount 1 kg pack
Vickershardness 195 HV10
Liquidustemp. 1360 °C
Casting temperature 145..
Virtually unbreakable
Low allergy risk
No volume shrinkage
Repairs are possible
Easy and quick to polish
Good humidity resistance
Rebasing & relining possible..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 6.5 x 24 mm, colour: black..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 22 x 3.5 mm, colour: green..
Optimal consistency for twoindications: post cementing and core build-up
“Cuts like dentin“
Very good mechanical properties for durable restorations
Contains substantial amount of nano-zirconia particles
Fluoride release
Very good radiopacity
Thixotropic properties
Use with Harvard InterLock ONE/Har..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 22 x 3.5 mm, colour: black..
uni-base® 300 is the latest advancement in dental die stone technology, serving as the successor to the well-established dento-rock® 280. Formulated as a type 4, thixotropic die stone, uni-base® 300 adheres to the DIN EN ISO 6873: 2013 standards. It is engineered for precision in creating saw, count..
Universal phosphate bonded casting investment material for model crown nand bridgework as well as casting technique by quick or progressive nheating procedure and for pressable ceramics Indications: crowns and bridgeworks, Co-Cr model castings, high-quality combination worksPacking: Univecast powder..