Ultra-Etch is a dental product commonly used as an etchant in restorative dentistry. It typically comes in a 1.2ml syringe, designed for precise and controlled application. The primary component of Ultra-Etch is phosphoric acid, usually at a concentration of 35%, which is the standard in dental etch..
37% Total Etching GelApplications:
Conditioning of surface for dentine and enamel
with composite and inlay / onlayComposition:
Phosphoric acid, H2O, Xanthan gumAdvantages:
Polymer thickened gel
Easy dispensing and application
No residue, rinse out completely
Thixotropic characteristics(not run..
Porcelain Etch Gel10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Used prior to Prime-Dent® porcelain bond enhancer...
Water-based gel containing phosphoric acid at 37%.
Easy application and removal.
Etching of the enamel and dentin to improve the adhesion of the restorative materials to the tooth...
Extra Gel is a thixotropic gel for precise etching of enamel.
It contains 37% orthophosphoric acid. For better control of the etched areas Extra-Gel is blue coloured. Distinctive thixotropic reaction...
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..
Actino is a blue tinted viscous gel of 37% Phosphoric acid for etching tooth enamel and dentin conditioning or composite surfaces prior to the bonding of any composites, sealants or bonding adhesives.Indications:
For conditioning of both dental enamel and dentine surfaces before placing an adhesiv..
a single component material that is used to enhance bond strength between composites/cement and porcelain. For best results, the etched porcelain surface should be completely dry and free of residual moisture before applying Silane-X...
INDICATIONS:
Cica is intended to etch only that part of the enamel and of the dentine (in total-etch-technique), which will be covered by a composite material:
in case of composite fillings
in case of adhesive fixing of Maryland bridges, inlays, brackets and temporary splinting
in case of sealing f..
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..
Actino is a blue tinted viscous gel of 37% Phosphoric acid for etching tooth enamel and dentin conditioning or composite surfaces prior to the bonding of any composites, sealants or bonding adhesives.Indications:
For conditioning of both dental enamel and dentine surfaces before placing an adhesiv..
Low-viscosity gel containing hydrofluoric acid at 5% and 10% for etching of porcelain.
Surface etching of dental veneers with the objective of increasing adhesion in restoration processes...
CharmEtch is a phosphoric acid etchant. type of semi-gel. It helps to give astrong adhesion for layer of the broken surface of the tooth effectively.
– Effective elimination of the smear layer
– Providing strong bonding strength
– Leave no residues
– Containing 10, 32, 35, 37% phosphoric acid
– Easy..
Ultradent's Porcelain Etch Refill is a dental product designed for etching porcelain surfaces in dental procedures. It consists of a viscous, buffered 9% hydrofluoric acid solution. The product is specifically formulated to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured denta..