P-Cem is a self-curing, eugenol-free, provisionary luting cement. It contains calcium hydroxide and hydroxyl apatite. The paste/paste system is delivered in tubes and allows for a flexible dosage and a fast mixing per hand. A thin layer suffices for a safe luting of the temporary crown. The cured ma..
INDICATIONS:
For temporary attachments of crowns, bridges and inlays
For temporary sealing of small occlusal cavities
ADVANTAGES:
Eugenol-free thus low allergy potential
No risk to use with composite material
Contains calcium hydroxide
Good adhesion of temporary restoration
Easy removal by co..
This medium-retention, non-eugenol temporary cement is enhanced with calcium hydroxide, ideal for use with temporary crowns and bridges. Its formula is designed to minimize postoperative sensitivities while providing an antimicrobial effect. The absence of eugenol eliminates the risk of allergies an..
Straight handpiece 1:1, Single Spray,
twist tension chuck system for handpiece
and contra-angle bur with Ø 2.35 mmIndications:
> Preparing
> Separating
> Dental trepanning
> Resections in anterior area
> Basic technical procedures..
Setting time (vicat-time) ca. 10 min
Product description Precision casting investment material for crown & bridge techniques
Linear thermal expansion 0,8 %
Flowability 140 mm
Compressive strength 4,2 - 5,1 MPa
Content/amount 12.8 kg (80 x 160 g bag)
Shelf life 24 Monat[e]
Processing time at 22°C ca...
IPS e.max CAD is an innovative lithium disilicate glass-ceramic for CAD/CAM applications. This unrivalled material combines highly esthetic qualities with exceptional user-friendliness. Unlike other CAD/CAM materials, IPS e.max CAD covers a comprehensive spectrum of indications. A wide range of tran..
IPS e.max CAD is an innovative lithium disilicate glass-ceramic for CAD/CAM applications. This unrivalled material combines highly esthetic qualities with exceptional user-friendliness. Unlike other CAD/CAM materials, IPS e.max CAD covers a comprehensive spectrum of indications. A wide range of tran..
IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind. In the past, the goal of layering was to add translucency and depth to opaque frameworks. Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can ..
IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind. In the past, the goal of layering was to add translucency and depth to opaque frameworks. Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can ..