Soft cutting sintered diamond disc for separa ting crowns and bridges. If used correctly it will not injure soft tissue! 1 disc sufficient for approxi mately 15-20 crowns! Use only with sufficient water cooling!..
The rail mounting plate was designed to allow the removal of the plaster cast through its sliding, thus without the inconvenient necessity to break the plaster. Its retention system consists in fixing the plaster on the inclined walls of the rail design...
2-step polishing system for high shine on all composite materials
• Polishers specifically adapted to each processing step
• Best results even on very hard composites..
for All Tooth Surfaces, Edged Design, Low-Medium Power, Sub Gingival.
Each piezo tip comes with a convenient ‘wear indicator card
to measure the amount of wear your tip has endured. When
a 0.5mm (half millimeter) wear is indicated, the tip should
be replaced...
Specially designed diamond-coated disc for separating full-ceramic crowns and bridges, especially zirconia.
Extremely high cutting efficiency, will cut 15-25 crowns if used correctly. Design and diamond coating optimized to ensure maximum cooling effect so that damage to
the pulpa due to excessive ..
Cross Linked 2 presents a premium range of two-layer acrylic teeth, designed to cater to the most demanding aesthetic and functional expectations. 100% developed, produced, and controlled in Slovenia, EU, these acrylic teeth set the benchmark for quality and reliability in prosthetic dentistry.
Key ..
SoloEtch is a single-component, self-etch dental adhesive designed for the modern dental professional seeking an ultra-efficient bonding system. Based on the proven ethanol/water solvent technology, SoloEtch provides a simplified approach to total etch applications. This product excels in both wet a..
Special orthodontic acrylic for attaching clasp arms and relining expansion screws when pressure-moulding retention and expansion plates using BIOCRYL® C and BIOCRYL® M. Material polymerises during the cooling phase in the pressure moulding unit. No need for time-consuming polymerisation in pressure..
Visco-plastic material, does not bond to acrylic, opaque.Application:
Duplication moulds, bleaching splints, bracket transfer masks, copings, moulds for temporary crowns and bridges..
Pressure moulding material made of thermoplastic polyurethane for use with DURASOFT® pd. Forms a robust inner layer and provides high quality hard-soft splints with excellent resistance against discolouration. Available in clear, blue and magenta.Application:
Discolouration resistant inner layer f..
Acrylate for the fabrication of orthodontic appliances by using the spray-on technique and the cold curing.
Fast mixing of the powder with the liquid, the material therefore doesn`t spread all over the model. Large choice of basic colours.
The colouring agents are cadmium free, therefore it isn`t to..
Special screw for rapid palatal expansion. The anatomically bent retention arms are soldered or welded onto molar bands. The specifically designed housing profile fits perfectly the paltal vault. The integrated polyamide bush prevents accidental resetting of the screw. Laser-welded indication for ro..
Cross Linked 2 presents a premium range of two-layer acrylic teeth, designed to cater to the most demanding aesthetic and functional expectations. 100% developed, produced, and controlled in Slovenia, EU, these acrylic teeth set the benchmark for quality and reliability in prosthetic dentistry.
Key ..