Ultra-Etch is a dental product commonly used as an etchant in restorative dentistry. It typically comes in a 1.2ml syringe, designed for precise and controlled application. The primary component of Ultra-Etch is phosphoric acid, usually at a concentration of 35%, which is the standard in dental etch..
37% Total Etching GelApplications:
Conditioning of surface for dentine and enamel
with composite and inlay / onlayComposition:
Phosphoric acid, H2O, Xanthan gumAdvantages:
Polymer thickened gel
Easy dispensing and application
No residue, rinse out completely
Thixotropic characteristics(not run..
CharmEtch is a phosphoric acid etchant. type of semi-gel. It helps to give astrong adhesion for layer of the broken surface of the tooth effectively.
– Effective elimination of the smear layer
– Providing strong bonding strength
– Leave no residues
– Containing 10, 32, 35, 37% phosphoric acid
– Easy..
Actino is a blue tinted viscous gel of 37% Phosphoric acid for etching tooth enamel and dentin conditioning or composite surfaces prior to the bonding of any composites, sealants or bonding adhesives.Indications:
For conditioning of both dental enamel and dentine surfaces before placing an adhesiv..
Water-based gel containing phosphoric acid at 37%.
Easy application and removal.
Etching of the enamel and dentin to improve the adhesion of the restorative materials to the tooth...
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
Extra Gel is a thixotropic gel for precise etching of enamel.
It contains 37% orthophosphoric acid. For better control of the etched areas Extra-Gel is blue coloured. Distinctive thixotropic reaction...
Low-viscosity gel containing hydrofluoric acid at 5% and 10% for etching of porcelain.
Surface etching of dental veneers with the objective of increasing adhesion in restoration processes...
Porcelain Etch Gel10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Used prior to Prime-Dent® porcelain bond enhancer...
SILAN-IT serves as a potent single-component adhesive primer. Its primary function is to amplify bonding during the reparation of fractures in glass-based ceramics. Additionally, it aids in preparing fiber-based elements in fiber-reinforced reconstructions like posts and inlay-cores.CompositionS..
light-curing adhesive system with high bond performance developed to be used under different acid etching protocols: self-etching, selective-etching or total-etching.• All classes of direct restorations with light-curing composites (classes I, II, III, IV and V).
• Adhesive cementation (together w..
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
a single component material that is used to enhance bond strength between composites/cement and porcelain. For best results, the etched porcelain surface should be completely dry and free of residual moisture before applying Silane-X...
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..
Ultradent's Porcelain Etch Refill is a dental product designed for etching porcelain surfaces in dental procedures. It consists of a viscous, buffered 9% hydrofluoric acid solution. The product is specifically formulated to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured denta..
Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9μm with 15-secon..
The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces for the composite cementation technique. It enhances the bonding effect between the composite cement and the ceramic bonding surface...
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..