All purpose Hand Piece Lubricant Spray for maintenance of all
dental handpieces including high speed, slow speed and air motors.Directions for use:
Insert into back of handpiece and spray
through for one to two seconds immediately
after each use and before sterilisation.
Wipe excess thoroughly. Im..
Specifications:Power Supply AC 100-240 V 50/60 HzAir Pressure 0.5-0.6 MPa (5.0-6.0 kgf/cm2)Weight 6.5 kg (C2 Type / C3 Type)Dimension W 280 x D 240 x H 350 mmSolution Tank Capacity 1.2 L* Connects only to Midwest 4-hole type* Air piping is necessary (5.0-6.0 kgf/cm2)Contents:iCare UnitPower CordChuc..
Validated process in three steps
The instrument preparation with Assistina 3x3
is carried out in three steps. The complete process is validated and confirmed by expert opinion.Step 1:
Automatic internal cleaning of the spray channels and transmission parts with W&H Activefluid. Blowing through ..
Assistina TWIN MB-302
Supply voltage: 100 – 240 V AC
Permitted voltage fluctuation: ±10 %
Nominal current: 0.2 – 0.4 A
Frequency: 50 – 60 Hz
Maximum power consumption: 18 VA
Air consumption: approx. 40 Nl/min.
5 – 10 bar
(controlled via an integrated, automatic pressure controll..
Each PANA SPRAY Plus is a specially formulated, highly effective general handpiece and air motor lubricant. Frequent application of PANA SPRAY Plus will assure handpiece and air motor performance and durability. Apply PANA SPRAY Plus every time before autoclaving any handpiece or air motor...