INDICATIONS:
Cica is intended to etch only that part of the enamel and of the dentine (in total-etch-technique), which will be covered by a composite material:
in case of composite fillings
in case of adhesive fixing of Maryland bridges, inlays, brackets and temporary splinting
in case of sealing f..
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Po..
Ultra-Etch is a dental product commonly used as an etchant in restorative dentistry. It typically comes in a 1.2ml syringe, designed for precise and controlled application. The primary component of Ultra-Etch is phosphoric acid, usually at a concentration of 35%, which is the standard in dental etch..
a single component material that is used to enhance bond strength between composites/cement and porcelain. For best results, the etched porcelain surface should be completely dry and free of residual moisture before applying Silane-X...
Porcelain Etch Gel10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Used prior to Prime-Dent® porcelain bond enhancer...
Bis-GMA based filled sealant resin is formulated specifically for the sealing of small pits and fissures. The flowable sealants have excellent penetration into light adaptations with high bond strength to the enamel for high wear resistance...
Low-viscosity gel containing hydrofluoric acid at 5% and 10% for etching of porcelain.
Surface etching of dental veneers with the objective of increasing adhesion in restoration processes...
This single-component material increases the bond strength of organic resins, such as composites and resin cements, to porcelain. Apply silane to the etched and dried porcelain surface. Conveniently dispenses one drop at a time from the syringe...
Ultradent's Porcelain Etch Refill is a dental product designed for etching porcelain surfaces in dental procedures. It consists of a viscous, buffered 9% hydrofluoric acid solution. The product is specifically formulated to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured denta..
37% Total Etching GelApplications:
Conditioning of surface for dentine and enamel
with composite and inlay / onlayComposition:
Phosphoric acid, H2O, Xanthan gumAdvantages:
Polymer thickened gel
Easy dispensing and application
No residue, rinse out completely
Thixotropic characteristics(not run..
Actino is a blue tinted viscous gel of 37% Phosphoric acid for etching tooth enamel and dentin conditioning or composite surfaces prior to the bonding of any composites, sealants or bonding adhesives.Indications:
For conditioning of both dental enamel and dentine surfaces before placing an adhesiv..
The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces for the composite cementation technique. It enhances the bonding effect between the composite cement and the ceramic bonding surface...
Actino is a blue tinted viscous gel of 37% Phosphoric acid for etching tooth enamel and dentin conditioning or composite surfaces prior to the bonding of any composites, sealants or bonding adhesives.Indications:
For conditioning of both dental enamel and dentine surfaces before placing an adhesiv..