CeraEtch, Porcelain Etching Gel (5% Hydrofluoric Acid) 1.5ml Syringe
Brand: Prevest DenPro
Category: Etchants
Product Code: 10012
Availability: Out Of Stock
28 SAR

Ex Tax: 28 SAR

ava_i

By

ava_i

Masa Medical Trading Est

All Equipment Sold By SOUQ.DENTAL are Include Warranty 2 Years start at the delivery date

All Instruments, Materials Sold By SOUQ.DENTAL  Can be returned within 5 days from the delivery date and should be in its original packing unless you have found out the product is defected once used

When need support or help contact us


CeraEtch is 5% Buffered Hydrofluoric acid in semi gel form. It improves the mechanical bond between porcelain and bonding agent by increasing the surface r...
CeraEtch is 5% Buffered Hydrofluoric acid in semi gel form. It improves the mechanical bond between porcelain and bonding agent by increasing the surface roughness.
Application:
Repair of porcelain restorations
Cementation of porcelain restorations
Product Benefits:
It improves the mechanical bond between porcelain and bonding agent.
Composition:
Hydrofluoric Acid, Ammonium Fluoride, Purified Water and Thickening Agent
Direction for Use:
For Cementation of Ceramic Restoration
Protective eye wear and gloves must be worn by the practitioner.
Remove cap from the CeraEtch syringe and attach dispensing tip and check the etchant flow through the tip before applying.
Apply etchant to the dry porcelain for 90 seconds.
Rinse with a copious amount of water and air dry. The etched surface should dull and frosty.
Apply 1‚ thin coats of Silane-X with a brush tip applicator to the etched surface and allows to dry for 30 seconds.
Apply Renew Universal / Total Etch Bonding adhesive and follow the instructions for bonding and restorative with composites or cements.
For Repair:
Protective eye wear must be worn by the practitioner and patient and protecting gloves must be worn by the practitioner.
Isolate the area to be etched with a rubber dam. Apply gingival barrier around the area to be etched.
Remove cap from the CeraEtch syringe and attach dispensing tip and check the etchant flow through the tip before applying intra orally. Apply etchant to the dry porcelain for 90 seconds. Suction the porcelain etchant and rinse with a copious amount of water and air dry. The etched surface should dull and frosty.
Apply 1‚ 2 thin coats of Silane-X with a brush tip applicator to the etched surface and allows to dry for 30 seconds.
Apply Renew Universal / Total Etch Bonding adhesive and follow the instructions for bonding and restorative with composites or cements.
Intro Pack 1x1.2ml Syringe + 5Applicator Tips

Write a review

Please login or register to review