Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
for partial upper-jaw denture
Can be used as retentions for partial maxillary dentures and as a reinforcement for acrylic full maxillary acrylic dentures..
Setting time (vicat-time) 6 min
Product description Universal investment material
Compressive strength 11 MPa
Linear thermal expansion 0,8 %
Flowability 140 mm
Content/amount 18 kg (45 x 400 g bag)
Processing time at 22°C ca. 3:30 min..
The half tear-drop shaped cross section prevents food residues from getting stuck on molars and premolars and increases the stability over the entire clasp length
All in all a very slender clasp profile with very good acceptance among patients
BEGO wax clasp profiles are very easy to mould, do not b..
This wax was developed for blocking out undercuts, creating clasp steps and relieving critical areas of the model
This blocking-out wax can be easily scraped and cut, is hard and thus ensures the dimensionally-stable, well-defined reproduction of clasp steps on the investment model
The boiling-out t..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 22 x 3.5 mm, colour: green..
The preparation wax is exceptionally malleable, allowing it to be adapted to the master model perfectly and with firm adhesion, which saves having to use an additional wax adhesive
The exemplary shape retention and edge strength of the preparation wax, with a high solidification point of approx. 70 ..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
Time savings when modelling upper-jaw frames with large saddles
A great advantage is that the border strip can easily be shaped as desired since the size can be varied by trimming the tips of the retentions
The wax is so supple that it can be shaped easily and reliably as required onto the duplicate..
Compatible with BEGO Rapid wax system
For all BEGO crown and bridge investment materials
Compatible with Rapid Wax System Minimal wear, thus lower costs than with comparable systems
Universally applicable for many casting systems, easy separation of mould and mould ring
Time savings in relation to m..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 15.5 mm, colour: black..
Hard and medium-hard wax compositions in blue, dark blue, grey and dentine ensure optimum waxing of all types of crowns
Colour preferences and facilitate customised contouring can be easily provided by three shades
The balanced shrinkage of BEGO crown and bridge waxes is reduced to a minimum by the ..
Fornax T has a very powerful induction heating of 3,600 VA.The advantages for you:
Rapid heating and melting of all commercially available precious and non-precious alloys (except titanium)
Sufficient power reserves even with critical alloys
Oxidation is minimised to the absolute necessary due to ..
The rounded upper edge and concave shape facing the tongue plus the anatomical lower-jaw profile make for good patient acceptance
Tip: For periodontal prophylaxis, a distance of 4 mm should be maintained between the gingival margin and the upper edge of
the bar in the case of lower-jaw partial dentu..
• Special duplicating hydrocolloid for sophisticated partial dentures, combination work and the acrylic casting technique
• User-friendly thanks to its high level of impression-taking accuracy, even with the finest of details, and tear-resistant due to its outstanding elasticity. This offers you the..
These preshaped clasp profiles simplify modelling and save time
The shape of the profiles enables a large number of variations by shortening the wax form..
Special corundum blasting material made from 99.6 % aluminium oxideAlpha corundum with high hardness
It remains sharp-edged until completely worn
When used in pencil sandblasters, Korox® 250 not only removes investment material residues and oxides efficiently, but is also ideal for optimal surface..