BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
Depending on the alloy and the field of application, the required mixing ratio can be created for these liquids using distilled or demineralised water
The higher the concentration of the mixing liquid, the greater the expansion of the investment material..
Composition: Co 63.0, Cr 30.0, Mo 5.0, Si 1.0, Mn 1.0, C
Base Metal: Cobalt
Color Code: 8
Preheat Temperature:
From: 950 °C
To: 1050 °C
Casting Temperature: 1420 °C
Solidus Temperature: 1270 °C
Liquidus Temperature: 1400 °C
Vickers Hardness: 385 HV10
..
An increasing number of waxed-up restorations are being scanned using the CAD/CAM technique
The use of highly opaque wax is the most effective way of preventing translucent effects and ensuring optimal data generation
Precision dental restorations using the CAD/CAM technique can only be fabricated i..
Simple, crease-free adaptation
Adheres firmly to the investment model and burns out leaving no residue
The high transparency of the wax makes for optimal clarity of the construction markings on the master model and saves unnecessary, time-consuming corrections to the wax-up
Sheet size 15 x 7.5 cm..
Precise reproduction, saving of material, dimensional stability and easy handling characterise the Wirosil® duplicating flask system.It consists of:
the base that holds the model
the sleeve with the optimal shape for upper and lower jaw models
the stabilisation insert of crucial importance for pre..
These preshaped clasp profiles simplify modelling and save time
The shape of the profiles enables a large number of variations by shortening the wax form..
Blasting material for blast polishingIt consists of tiny, lead-free beads of soda glass which produce an even silky lustre
The controlled size and shape of the beads make for a high level of usability and therefore efficient, economical working
No metal is lost because the surface is compressed an..
For pre-polishing the surfaces of precious and non-precious castings which can then be high-lustre polished to a deep, lasting lustreper minute 10000 min
Content/amount 100 pieces
Product description Ø 22 x 3.5 mm, colour: black..
Tried and tested wax for modelling the bases of upper partial dentures
Can be easily adapted and adheres firmly to the investment model with no additional wax adhesive
The stippled casting wax is available in three different surface textures – from fine to coarse – and allows customisation of the
su..
BEGO wax wires are very easy to shape, do not bend up, and burn out leaving no residue. This allows casting of stress-free constructions and even pressable ceramics
The wax formula is designed to provide high internal stability and offers remarkable protection against inadvertent deformation and con..
for maxillary partial denture.
Permit the simple and effective shaping of retentions to total or partial dentures
They guarantee a high level of security in the connection between the resin and the partial denture plate
The large grid retentions facilitate very economical use of material..
Depending on the alloy and the field of application, the required mixing ratio can be created for these liquids using distilled or demineralised water
The higher the concentration of the mixing liquid, the greater the expansion of the investment material..
BEGO cervical wax for cervical edges in eggplant (aubergine) is a tension-free wax on which extremely high demands are placed during modelling
BEGO cervical wax is completely tension-free after modelling and is therefore highly recommended for details on cervical edges of crowns, precision parts and..
Preheat temp. from 900 °C
Preheat temp. to 1000 °C
Density g/cm³ 8,3 g/cm³
Iso type ISO22674 3
Base metall Nickel
Elastic modul 170
Yield strength 335 MPa
Tensile strength 655 MPa
Elongation at break 43 %
Content/amount 1 kg pack
Vickershardness 195 HV10
Liquidustemp. 1360 °C
Casting temperature 145..
An increasing number of waxed-up restorations are being scanned using the CAD/CAM technique
The use of highly opaque wax is the most effective way of preventing translucent effects and ensuring optimal data generation
Precision dental restorations using the CAD/CAM technique can only be fabricated i..